Production introduction:

1/3” Sony Color CCD&DSP

420/480/540 TV lines

Pan: 360degree non-stop; Tilt: 95degree preset speed: 0.5-45degree

128 Preset Points; 2 Auto- scan

Motorized Zoom lens, Control by keyboard or DVR

4-9/8-20mm (1.3 Mega-pixel); 5-15mm(2.0 Mega-Pixel)

Communication: RS485, PELCO-D/P Protocol

Illumination: 0.01lux

Detail specification:

1. Dome Parameter

a) Electric Index

【Video Output】: 1.0±0.2VP-P, 75Ω compound video signal

【(S/N)】:≥50dB

【Manual Speed】:(0.5°~50°/s)/ Vertical(0.5°~50°/s)

【Preset Speed】:50°/s

【Rotation】:Horizontal 360°endless rotation Vertical 0~92°with auto overturn

【Focus Speed auto-control】:control speed auto-adjusting according to the focal length

【Preset Positions】: 128 pieces

【Auto overturning】:Vertical 90°auto turning into 180°

【Auto scanning】:2 pieces, 1 auto scanning route and speed can be set

【Synchronization System】:Internal / External optional

【Communication Baud Rate】:1200/2400/4800/9600/bps

【Address Range】:1~127

b) Physics Index

【Video Output Interface】:BNC

【Remote Control】:RS485 twisted cable

【Environment Temperature】:-10℃~+50℃

【Environment Humidity】:0~95％(no congealing)

【International Protection】:24h protective housing, 3000V lighting-proof, surge voltage protective

【POWER】:DC 12V/50Hz 1.2A

【Dimension】:125×125(L×D)

【Weight】:1㎏(without bracket and adapter)

【casing】:transparent or semi-transparent

2. CCTV Lens Parameter

The intelligent dome set for multiple single board cameras: 420TVL, 480TVL, 520TVL, etc. For more info, please refer to

the specific camera.

3. Dome Performance Feature

The intelligent dome structures a new and compact body with fast heat yielding module. Its easy installation with black

case inside fulfills hidden monitoring. The body rotates flexibly with less noise and wider view shooting. The multiple automatic

functions capture excellent crisp images for clients.

a) Built-in Decoder

1) Full digital design, all data saved inside of the module with memory function at accidental power-off

2) All in one integrated design, high reliability

3) 128 preset positions freely saved

4) 1-80 preset positions support auto cruise function, while 1 cruise route can save 8 preset positions, each position

pauses 6 seconds.

1) With RS485 remote control interface

2) Thanks to its expanding function, any keyboard can operate the control of the high speed dome.

a) Built-in PTZ

1) Precise stepping electrical motor, stable rotation, flexible response, correct location

2) All in one integrated design, compact structure, fast wiring connection, facility for use

3) Exquisite mechanical driving equipment, horizontal 360°endless rotation, vertical 0-92°movement, 180°auto

overturning

4) Horizontal slow rotation at 1° /s, no vibrating images

5) The former movement automatically recovered after power-on

b) Built-in all in one camera

1) Auto Focus, Auto Iris, Auto-Bright Control, AWB

2) Color and B/W auto change, BLC, AES

Part 2 Function and Operation Instruction

This part mainly describes the leading function and common principle of the all in one intelligent dome camera. It does not

refer to the specific operational methods. Different systematical platforms have different methods. In some cases, special

requirement and operational method would exist, subject to the systematical manufacturer’s manual.

1. Set CCTV encoding

The control board of the dome has a 8-DIP-switch, used to set the address, communication and control protocols (refer to “DIP

switch set”) control protocol PELCOD. Any command should agree with the targeted camera address, and cameras only

response when the address around is the same..

2. Auto-execute the function of the movement

Users can control the movement of the lens by rotate the keyboard rod from up to down, from left to right. They can also track the

target or shift the view. And, the focal length can be adjusted to fulfill the size of the view angle and the targeted image. In the

state of shortening auto focus and auto iris, as the lens rotates, the camera would adjust fast and automatically and capture crisp images according to the variable objects.

The technology of matching focal length with speed Manual adjusting the farther focal length when the speed dome moves at

a high speed, the image would move fast and info could be lost by rotating the rod. Based on human intelligent design, the speed

dome can adjust the horizontal and vertical speed in an automatic way, which simplifies the manual tracking target. Such function

can be realized by setting the “zoom” as “open” in the OSD menu.

3. CCTV Camera Operation

Zoom control

User can adjust the image farther/nearer to get a panoramic view by controlling the keyboard rod “ ZOOM- / ZOOM+ ”. The speed dome supports both digital and optical vari-focus. Digital vari-focus can be set.

In the following cases, the camera’s target is unable to auto focus:

1. The target is not in the center of the image；

2. Watching the farther or nearer objects, the former or the latter part are neither clear；

3. The target is strong light object, like neon light, spot light；

4. The object moves to fast；

5. large square of monotonous object, like wall；

6. The object is too dark or vague；

7. The targeted picture is too small.

4. Surveillance function

a) Set & Transfer the preset points

The function of preset positions is, temporarily storing such location parameter as horizontal angel / inclination / lens’ focus in a

memory and transferring them whenever theyre needed. User can quickly transfer the preset positions via the keyboard or

something else. The speed dome supports 127 preset points.

b) Automatic Cruise

Automatic Cruise is internal set function, which insert the points and realize the automatic cruise among preset positions by

beforehand programming them in the cruise lists. The cruise order and pausing timing can be programmed and one cruise route

can store 8 points and timing.

c) Auto Scanning

Cameras would level scan back and forth among the left & right limits at the set speed via the keyboard and menu setting the left

and right limit well beforehand.

d) Power-off Protective

When correct or incorrect power-off happens, the camera would auto-protect the movement state before the power-off. After

power-on, the camera would auto-recover the former protected movement.